Manualshelf

Instructions / Assembly

ManualsBrandsExtreme Tools ManualsBottom Tool ChestsDX Series 72 in. 17-Drawer Roller Cabinet Tool Chest in Matte Black with Black Trim
123456
Handle Installation
NOTE: Assemble the handle rst to make it easier to move the tool cabinet.
Position the handle over the holes in the cabinet and attach with the provided
(4) M6 socket head screws. Tighten securely.
ASSEMBLY
Drawer Removal
Pull drawer out so that it is almost
fully extended.
Push up on the black lever on one
drawer slide and at the same time
push down on the lever on the
other side.
With the levers in these positions,
pull the drawer out until it releases
from the drawer slides.
Drawer Replacement
Extend the drawer slides.
Careful align the brackets on
the sides of the drawers with the
slots of the cabinet slides. Insert
the brackets on the side of each
drawer into the slots of the cabinet
slides.
Once properly inserted,
completely close the drawer to
set the slides into their properly
functioning positions.
OPERATING PROCEDURE