Instructions / Assembly

Bottom Tray Installation
Tray is heavy and may require
2 adults to install.
a. After installing the four (4)
posts, attach the bottom tray.
Align the holes of the four
corners of the bottom tray with
the holes located on the bottom
of the posts as shown right.
b. Use two (2) at head M8 x
14mm Flat Head Phillips Screws
and M8 Nut with Spur Washers
(Part # 10 & 11) for each corner
to attach bottom tray. Tighten all
screws securely.
Caster Installation
NOTE: This step may
requires 2 adults to
complete safely.
a. Carefully ip the tool cart
upside down onto the mat/
blanket.
b. Position the four (4)
swivel casters over the holes
on the caster channels.
c. Insert four (4) M8-1.25
x 20 Bolts with Flat & Lock
Washers (Part # 16) through
each caster and into the
installed rivet nuts of the
caster channels. Tighten all
bolts securely.
d. Engage the brakes on
all casters!