R Painted Steel Cabinet Manual PWS4111RCTXBK PWS4111RCTXRD Extreme Tools Inc.
Parts List 23 22 21 20 19 18 17 1 2 3 16 4 5 15 14 6 12 11 Ref # Description 8 10 7 9 Part # Qty 1 Cabinet Handle 306046 1 2 M6 x 12 Hex Bolt 321051 4 3 Drawer 107039 3 4 Drawer 107040 1 5 Slide Set 300022-300023 14 6 Swivel Caster 302000 2 7 Washer 324002 16 8 M8x20 Hex Bolt 321024 16 9 Spring 329021 22 10 Drawer Liner 550161 5 11 Drawer 107041 1 12 Drawer Pull 107050 5 13 Drawer Liner 550156 5 14 Drawer 107038 1 15 Drawer Pull 107051
Assembly Handle Installation NOTE: Assemble the handle first to make it easier to move the tool cabinet. Simply position the handle over the holes in the cabinet and attach with the provided M6 x 12 hex bolts. Tighten securely. Caster Installation NOTE: You may require the assistance of another person to complete this step. Carefully lay the cabinet on its back, with a soft mat underneath to protect the finish.
Operation Raise and Release Drawer Fronts This unit is equipped with raise and release drawer fronts. To open, lift up on the drawer front while pulling towards you. To close, shut the drawer firmly until the latch engages. Lift If the drawer does not stay closed, the hook may be bent, or it may be rubbing against the drawer slides. To fix this problem, lightly bend the hook until the drawer will engage in the slide. Drawer Removal Pull the drawer out so that it’s almost fully extended.
Safety WARNING Do not attempt to lift the unit by its side handles using chains, ropes or lifting devices, if two people cannot lift the unit. Use a forklift placed under the bottom of the unit if this situation occurs. The side handle may fail, which may cause personal injury or damage to the product. Lock the drawers before moving this product. The drawers could come open and make the product unstable and tip, which may cause personal injury or product damage.
