Instructions / Assembly

ManualsBrandsExtreme Tools ManualsBottom Tool Chests41 in. 11-Drawer Standard Roller Cabinet Tool Chest in Textured Red

1

2

3

4

3

Assembly

Handle Installation

NOTE: Assemble the handle rst

to make it easier to move the tool

cabinet.

Simply position the handle over the

holes in the cabinet and attach with

the provided M6 x 12 hex bolts.

Tighten securely.

Caster Installation

NOTE: You may require the

assistance of another person to

complete this step.

Carefully lay the cabinet on its back,

with a soft mat underneath to protect

the nish.

Position the two swivel casters on

the bottom of the cabinet, on the

right side (same side as the handle).

Insert four M8 x 20 hex bolts through

washers, then through each caster

and into the bottom of the cabinet.

Tighten securely.

Repeat for the two rigid casters on

the other side of the cabinet.