R Painted Steel Cabinet Manual PWS4124RCTXBK PWS4124RCTXRD Extreme Tools Inc.
Parts List 16 14 15 23 13 22 21 12 2 3 17 18 11 20 9 Ref # Description 19 8 6 Part # Qty 1 Cabinet Handle 306046 1 2 M6 x 12 Hex Bolt 321051 4 3 Slide Set (1) 300207–300208 2 4 Swivel Caster 302000 2 5 Washer 324002 16 6 M8 x 20 Hex Bolt 321024 16 7 Slide Set (2) 300176–300177 12 8 Drawer Pull 301282 5 9 Drawer Liner 551216 5 10 Drawer Liner 551215 5 11 Drawer Pull 301281 5 12 Rigid Caster 302001 2 13 Lock and Key (1201–1204) 304007 1 14 Drawe
Assembly Handle Installation NOTE: Assemble the handle first to make it easier to move the tool cabinet. Simply position the handle over the holes in the cabinet and attach with the provided M6 x 12 hex bolts. Tighten securely. Caster Installation NOTE: You may require the assistance of another person to complete this step. Carefully lay the cabinet on its back, with a soft mat underneath to protect the finish.
Operation Raise and Release Drawer Fronts This unit is equipped with raise and release drawer fronts. To open, lift up on the drawer front while pulling towards you. To close, shut the drawer firmly until the latch engages. Lift If the drawer does not stay closed, the hook may be bent, or it may be rubbing against the drawer slides. To fix this problem, lightly bend the hook until the drawer will engage in the slide. Drawer Removal Pull the drawer out so that it’s almost fully extended.
Safety WARNING Do not attempt to lift the unit by its side handles using chains, ropes or lifting devices, if two people cannot lift the unit. Use a forklift placed under the bottom of the unit if this situation occurs. The side handle may fail, which may cause personal injury or damage to the product. Lock the drawers before moving this product. The drawers could come open and make the product unstable and tip, which may cause personal injury or product damage.
