55 inch Painted Steel Roller Cabinet Model: RX552512RC-X 150-300 Lbs. Drawer Capacity Extreme Tools, Inc. 740 Frontenac Rd. Naperville, Illinois 60563 6330.369.9303 www. ExtremeTools.
Roller Cabinet Parts List RX552512RC-X 150 lbs. drawer slides Replacement keys may be ordered using the code that appears on the face of the lock. To order replacement parts, have the part number, tool box color and quantity ready. If under warranty, the serial number is REQUIRED to get replacement parts. Not all parts are available under warranty and may be purchased separately.
RX552512RC-X PARTS LIST Item 3 4 5 5 5 5 5 5 6 6 6 6 6 6 7 7 7 7 7 7 8 8 8 8 8 8 9 9 9 9 9 9 10 10 10 Part number Z-LK EX01-04 Z-ECRX ZDRR1305E2QXGK ZDRR1305E2QXKR ZDRR1305E2QXKU ZDRR1305E2QXMK ZDRR1305E2QXOK ZDRR1305E2QXUK ZDRR1305E1QXGK ZDRR1305E1QXKR ZDRR1305E1QXKU ZDRR1305E1QXMK ZDRR1305E1QXOK ZDRR1305E1QXUK ZDRR398E1QXGK ZDRR398E1QXKR ZDRR398E1QXKU ZDRR398E1QXMK ZDRR398E1QXOK ZDRR398E1QXUK ZDRR865E1QXGK ZDRR865E1QXKR ZDRR865E1QXKU ZDRR865E1QXMK ZDRR865E1QXOK ZDRR865E1QXUK ZDRR865E2QXGK ZDRR865E2QXKR
RX552512RC-X PARTS LIST Continued 12 13 17 17 18 19 20 21 22 23 24 24 24 25 25 25 25 25 25 29 29 29 30 30 30 32 32 32 Z-LGL ZM6BTHXSS-16 ZMDF552515MM ZSST552525MM ZDL1278X559 PVC ZDL839X559 PVC ZDL375X559 PVC Z-CA6R(CR) Z-CA6R(CRS) Z-LGS ZHDRD29SS483-BK ZHDRD29SS483-BL ZHDRD29SS483-RD ZDRR398E4QXGK ZDRR398E4QXKR ZDRR398E4QXKU ZDRR398E4QXMK ZDRR398E4QXOK ZDRR398E4QXUK ZDPRX864-BK ZDPRX864-BL ZDPRX864-RD ZDPRX395-BK ZDPRX395-BL ZDPRX395-RD ZDPRX1305-BK ZDPRX1305-BL ZDPRX1305-RD ZSLX530F520 Z-DL552512RC-Kit
ASSEMBLY Handle Installation NOTE: Assemble the handle first to make it easier to move the tool cabinet. Position the handle over the holes in the cabinet and attach with the provided (4) ZM6BTHXSS-16 screws. Tighten securely. Securing Top Chest and Roller Cabinet Place the chest on the cabinet. Open the top drawer and locate the two holes under the top surface of the roller cabinet. Place one flat washer on each of (2) M6 x 12mm hex bolts.
OPERATING PROCEDURE Drawer Removal Pull drawer out so that it is almost fully extended. Push up on the black lever on one drawer slide and at the same time push down on the lever on the other side. With the levers in these positions, pull the drawer out until it releases from the drawer slides. Drawer Replacement Extend the drawer slides. Careful align the brackets on the sides of the drawers with the slots of the cabinet slides.
SAFETY WARNING Do not attempt to lift the cabinet by its side handle using chains, ropes or lifting device. Side handle may fail resulting in personal injury or damage to the product! Use a forklift or similar lifting device with forks placed under the bottom of the tool box to move if tool box cannot be moved by two people.
