Instructions / Assembly

Step 5: Secure Back Panel & Set Shelf Height
a. Line up the holes on the left-hand Back Panel Flange with the
threaded inserts of the Side Panel.
b. Secure using (6) screws (#11.)
c. Repeat on for right-hand side panel.
d. Determine the desired height for the Adjustable Shelf. Pre-
thread (2) screws (#11) about halfway in on left-hand and
right-hand sides.
Secure side panel to back panel using (6)
M5x16mm Pan Head Screws
Determine adjustable shelf
height. Pre-thread (2) screws
about halfway in on each side
at desired height.
Step 6: Install Adjustable Shelf
a. Locate the (2) open slots on each side of the shelf. Line up the
open slots with the (4) threaded screws that were installed in
Step 5d. Lay down shelf so that (4) open slots t on top of the
(4) screws.
b. Tighten (4) screws.
c. Locate (2) threaded inserts on the back of the shelf. From
the back of the Back Panel, insert (2) screws through the
pegboard and through the threaded inserts and tighten.
Locate threaded inserts
and insert (2) screws
through the pegboard
and insert holes to
secure shelf to Back
Panel.
4