Instructions / Assembly

Step 11: Install Rubber Grommets

a. Insert the Rubber Grommets (#8) in the openings toward the

lower right and left sides of the Back Panel. These openings

are where power cords will exit the Back Panel and plug into a

wall outlet.

Step 10: Install Power Strip with USB Ports (#7)

a. Line up 4 holes on the Power Strip (#7) with 4 holes located

toward the right on the face of the shelf front.

b. Use Phillips screwdriver, (4) M4x10mm Machine Screws (#21)

and (4) M4 LockNuts (#20) to secure power strip.

FULLY ASSEMBLED

EXTREME TOOLS RX SERIES HUTCH

shown on

RX SERIES ROLLER CABINET