User's Manual

68-1080-01, Rev. B
01 10
MBD 123 1U Full Rack Width Mounting Kit
N Only 1U full rack width products can be mounted using this kit
(part number 70-485-01).
This kit allows the product to be mounted to the vertical rack supports and
face either the front or the rear of the rack. Refer to the drawing on the
opposite side of this card.
Rack Mounting Instructions
1. Remove any installed rubber feet from the unit.
2. Remove two screws from one side of the unit. Retain the screws for
possible later reassembly.
3. Attach one bracket to the side of the unit using the longer screws
included in the kit.
4. Repeat steps 2 and 3 on the other side of the unit.
5. Mount the unit to the rack using the four included rack mounting screws.
Mounting Kit Contents
• 2 mounting brackets (left and right)
• 4 side bracket mounting screws
• 4 rack mounting screws
Extron USA - West
Headquarters
+800.63 3.9876
Inside USA / Canada Only
+1.714.4 91.1500
+1.714.4 91.1517 FAX
Extron USA - East
+800.63 3.9876
Inside USA / Canada Only
+1.919.86 3.1794
+1.919.86 3.1797 FAX
Extron Europe
+800.39 87.6673
Inside Europe Only
+31.33.453.4040
+31.33.453.4050 FAX
Extron Asia
+800.7339.8766
Inside Asia Only
+65.6383.4400
+65.6383.4664 FAX
Extron Japan
+81.3.3511.7655
+81.3.3511.7656 FAX
Extron China
+400.883.156 8
Inside China Only
+86.21.3760.1568
+86.21.3760.1566 FA X
Extron Middle East
+971.4.2991800
+971.4.2991880 FAX
Installation Example