User's Manual

X2@ = Test patterns:
0 = Off (default)
1 = Crop
2 = Alternating pixels
3 = Crosshatch
4 = Color bars
5 = Grayscale
6 = Blue mode (no crop pattern)
7 = Audio Test (Crop pattern, OSD text Audio Test. Outputs pink noise at 48 kHz,
24 bits, channels 1/2.)
X2% = User presets — 1 to 3
Response is 2 digits padded with a zero.
X2^ = Input presets — 1 to 128 (global for device)
Response is 3 digits padded with a zero.
X2* = Output sync timeout — 1 to 500 in 1-second increments
0 = The output sync is instantly disabled with no active input.
501 = The output sync never times out (default).
X2( = Front panel lock (executive mode) status
0 = Disabled (default)
1 = Enabled (front panel locked)
X3) = OSD menu system status
0 = Off
1 = On
X3! = Verbose mode
0 = None
1 = Verbose mode (default)
2 = Tagged response for queries
3 = Verbose mode and tagged response for queries
NOTE: If tagged responses are enabled, all view commands return the constant string
plus the data. For example:
Command:
E M SSAV }
Response: SsavM X4) ] (verbose mode)
or
X4) ] (non-verbose mode)
X3@ = Unit name — A text string of up to 24 characters (A-Z, 0-9, and the hyphen (-) are
permitted.
The first character must be a letter.
The last character cannot be a hyphen.
No blank or space characters are permitted as part of the name.
No distinction is made between uppercase and lowercase letters.
X3# = Default name — DSC 3G-HD A or DSC HD-3G A
X3$ = Model description — Digital Scaling Converter
X3& = Overscan — DSC 3G-HD A
Applied only to SMPTE input rates (480i, 576i, 720p, 1080i, 1080p, and 2k)
0 = 0.0% — A true Auto-Image is executed on SMPTE inputs (default for SDI).
1 = 2.5% — An Auto-Image command snaps to a 2.5% table (no true Auto-Image is
performed).
2 = 5.0% — An Auto-Image command snaps to a 5.0% table (no true Auto-Image is
performed).
X3* = Overscan — DSC HD-3G A
Applied only to SMPTE input rates (480i, 576i, 1080p @ 50 and 60 Hz, and 2k)
0 = 0.0% — A true Auto-Image is executed on SMPTE inputs (default for HDMI and DVI).
1 = 2.5% — Auto-Image commands snap to a 2.5% table (no true Auto-Image is
performed).
2 = 5.0% — Auto-Image commands snap to a 5.0% table (no true Auto-Image is
performed).
DSC 3G-HD A and DSC HD-3G A • Remote Configuration and Control 46