- Extron Electronics Dual Link DVI Transmitter and Receiver User Manual

DVI DL 201 Tx/Rx • Installation
Installation, cont’d
2-6
Pole mounting
The instructions for mounting the receiver on the projector pole,
using the PMK 300 pole mounting kit (PN 70-374-01), are shown
below. For instructions on using any other Extron projector
mounting kit, consult the appropriate user guide.
1. If necessary, remove the rubber feet from the bottom of the
DVI DL 201 Rx.
2. Mount the receiver to any of the bracket's three mounting
plates. The unit should be vertically mounted with the
front panel (DVI output) facing towards the projector and
the rear panel (RJ-45 slots) facing towards the ceiling.
Extron
PMK 300
Multi Product Projector
Mount Kit
U-Bolt
Rubber Pad
Backing
Brace
Clamping
Plate
Projector mounting the DVI DL 201 Rx