- Extron Electronics Dual Link DVI Transmitter and Receiver User Manual

DVI DL 201 Tx/Rx • Installation
2-11
DVI DL 201 Rx rear panel features
The illustration below shows the rear panel features of the
DVI DL 201 Rx.
POWER
12V
0.4A MAX
12
INPUTS
1
2
3
13
DO NOT
CONNECT
INPUTS TO
LAN
DVI DL 201 Rx
DVI DL 201 Rx rear panel features
l
Power input — An optional 12 VDC power supply (not
provided) connects to this two-pole, 3.5 mm captive screw
connector.
N
The receiver can be remotely powered by the transmitter.
m
Twisted pair inputs — Three RJ-45 jacks receive video, remote
power, and pass-through communications/control signals from
the transmitter. They can also send pass-through control signals
via the transmitter.
N
The DVI DL 201 transmits high frequency signals via
these TP outputs. Connections between the transmitter
and receiver must be point to point. It is recommended
that there should be no couplers, adapter, or patch panels
between the transmitter and receiver units.