User's Manual

Command/response table for SIS commands (continued)
Command ASCII (Telnet) URL Encoded (Web) Response
Reset (Zap)/Erase Commands
Erase user-supplied Web page or file
24 28
E
filename EF
}
W filename EF
|
Del•filename
]
Erase flash memory
24
E
ZFFF
}
WZFFF
|
Zpf
]
Reset all device settings to factory
24
E
ZXXX
}
WZXXX
|
Zpx
]
Absolute system reset, but retain IP
24
E
ZY
}
WZY
|
Zpy
]
NOTE: This command is the same as the ZQQQ command except that it excludes IP settings such as IP address, subnet mask, gateway IP address, unit name, DHCP setting,
and port mapping (Telnet/Web/direct access) in order to preserve communication with the device. This reset is recommended after a firmware update. It also erases the files ystem and passwords.
Absolute system reset
24
E
ZQQQ
}
WZQQQ
|
Zpq
]
NOTE: This command resets all settings/memories. The ZQQQ command resets everything (all settings, adjustments, the IP address, and subnet mask) to the factory
default values. Files in flash memory are also erased by this command. The firmware version does not change. The IP address is reset to 192.168.254.254 and the subnet mask is reset to 255.255.0.0.
IPL T CR48 • Communication and Control 32