User Guide
Table Of Contents
- Front Cover
- Safety Information
- FCC Class
- FDA/IEC 60825-1 Requirements
- Conventions Used in this Guide
- Specifications Availability
- Contents
- Introduction
- Installation and Operation
- SIS Configuration and Control
- FOX Extenders Control Program
- Reference Information
- Extron Warranty
Master System Reset — Resets all unit settings and user settings to factory defaults.
From the Tools menu, locate the Reset submenu and select Master System Reset.
Figure 17. Unit System Dialog Box
Audio Gain/Atten. Reset — Resets the level of audio gain and attenuation to factory
defaults.
From the Tools menu, locate the Reset submenu and select Audio Gain/Atten. Reset.
Figure 18. Audio Gain and Attenuation Reset Dialog Box
Presets Reset — Is not available for the FOX T UWP 302.
Update Firmware
The Update Firmware option opens the Extron Firmware Loader application. This application
is used to upload new firmware to the connected device.
NOTE: In order for the Update Firmware option to work, install the Firmware Loader
application (see Firmware Loader on page 37). Otherwise, the Update Firmware
option is disabled.
To update firmware:
1. From the Tools menu, select Update Firmware. Alternatively, click the icon. This
opens Firmware Loader (if this application is already installed on the connected PC).
2. Find firmware to upload to the desired device by performing one of the following
actions:
• From the File menu of Firmware Loader, select New Firmware for Selected
Devices
.
• In the Devices section of the Firmware Loader main screen, double-click the New
Firmware File
field associated with the selected device.
The Choose Firmware File dialog box opens.
3. Browse to the device-specific firmware file that has been downloaded on your PC. Valid
firmware files have a .s19 file extension (see Downloading Firmware on page 38).
4. Click the Open button. The Choose Firmware File dialog box closes.
FOX T UWP 302 Wallplate Transmitter • FOX Extenders Control Program 26