User Guide
Table Of Contents
- Front Cover
- Safety Information
- FCC Class
- FDA/IEC 60825-1 Requirements
- Conventions Used in this Guide
- Specifications Availability
- Contents
- Introduction
- Installation and Operation
- SIS Configuration and Control
- FOX Extenders Control Program
- Reference Information
- Extron Warranty
Reference
Information
This section describes basic installation information of the Extron Firmware Loader program
to upload firmware. Topics in this section include:
• Firmware Loader
• Firmware Updates
Firmware Loader
To upload and update firmware for the FOX T UWP 302, download the new firmware to a
connected computer and upload the firmware with the Firmware Loader utility or the FOX
Extenders Control Program (see to the FOX Extenders Control Program Help File).
Downloading Extron Firmware Loader
Figure 36. Firmware Loader on the Extron Website
1. On the Extron website, www.extron.com, click the Download tab.
2. From the left sidebar, click the Software link.
3. Navigate to Firmware Loader.
4. Click the Download link on the right that corresponds with the program.
5. Submit any required information to start the download.
38FOX T UWP 302 Wallplate Transmitter • Reference Information