- Extron Electronics Ethernet control interface User's Manual

IPI 100 Series, IPI 200 Series • Programming and Control
5-23
Command ASCII (Telnet)
(host to intercom)
URL Encoded (Web) (host to intercom)
Response (intercom to host)
Additional description
Clear administrator password
24
E
• CA
}
W%20 CA
]
Ipa•
]
Clear/remove all passwords (administrator and user).
N
A user password cannot be assigned if an administrator password does not exist. Also, if the administrator password is cleared, the user
password is also cleared.
Read administrator password
E
CA
}
WCA
| X4! ]
Set user password
14, 24
E
X3#
CU
}
W
X3#
CU
|
Ipu•
X4! ]
Set the user password (
X3#
is 4 to 12 alphanumeric characters). The password is case sensitive. Special characters (spaces, symbols) are not allowed.
X4!
=
Password to display on screen.
N
A user password cannot be assigned if an administrator password does not exist. Also, if the administrator password is cleared, the user
password is also cleared.
Clear user password
24
E
• CU
}
W%20CU
|
Ipu•
]
This clears the user password only.
Read user password
E
CU
}
WCU
| X4! ]
Read connection’s security level
E
CK
}
WCK
| X5@
]
or
Pvl
X5@ ]
For
X5@
11 = user 12 = administrator