- Extron Electronics Remote Control Panel User's Manual MKP 2000

MKP 2000 Remote Control Panel • Reference Data

Reference Data, cont’d

A-5A-4

Mounting and Cabling Specifications

Electrical box cutout

Any standard box that meets the local electrical codes can be

used, but boxes from different manufacturers can have different

size openings. Extron recommends testing the fit of the MKP

inside the electrical box and then placing the box flush against

the mounting surface and tracing the cutout area.

Panel mount cutout template

Figure A-1 is a drawing that shows the dimensions for cutting a

hole to accommodate the keypad circuit board for mounting the

keypad on a flat surface. This type of installation can include a

desk or podium, or a control panel or dashboard, where the

back is protected and does not require an electrical box.

Drawn to scale; may be used as a template.

MKP 2000

VOLUME

I/O

2.63”

3.38”

Full Size

Circuit Board Box

(behind front panel)

(cut-out area should be slightly

larger)

Figure A-1 — Panel mount cutout template