- Extron Electronics Mountable Interfaces User's Manual

RGB 400 Series Part Numbers and Accessories
RGB 400 Series Part Numbers and Accessories
Part Numbers and Accessories, cont’d
D-5
setalPretpadAlarutcetihcrArotcennoCepyTelgniS
noitpircsedetalpretpadA
etalP
ezis
epytrotcennoctnorF epytrotcennocraeR #traP
yarG kcalB etihW
)elamefotelamef(lerrabCNB21elamefCNBelamefCNB190-0710-11-12-
)elamefotelamef(lerrabCNB31elamefCNBelamefCNB190-0720-21-22-
)elamefotelamef(lerrabCNB52elamefCNBelamefCNB190-0730-31-32-
)elamefotelamef(lerrabCNBotACR21)kcalb/der(elamefACRelamefCNB490-0710-11-12-
)elamefotelamef(lerrabCNBotACR31)kcalb/der(elamefACRelamefCNB490-0720-21-22-
).mefot.mef(lerraboediv-Sotoediv-S21elamefNIDinimnip-4elamefNIDinimnip-4590-0710-11-12-
elamefonohpoerets"¼21elamefonohpoerets"¼ slanimretgulredlos3790-0710-11-12-
elamefoeretsinimmm5.321elamefoeretsinimmm5.3slanimretgulredlos3890-0710-11-12-
)elamefotelamef(54-JR22elamef54-JRelamef54-JR001-0710-11-12-
)elamefotelamef(51-DH11elamefDHnip-51elamefDHnip-51101-0710-11-12-
)elamefotelamef(9-D11elamefDnip-9elamefDnip-9201-0710-11-12-
elamefRLXnip-312elamefRLXnip-3slanimretgulredlos3301-0710-11-12-
)esuom/draobyek(NIDinimnip-621elamefNIDinimnip-6elamefNIDinimnip-6401-0710-11-12-
lanimretwercsevitpacelop5,mm5.311wercsevitpacelop5,mm5.3spucredlos501-0710-11-12-
em-wohsDEL/hctiwserusolctcatnoc1
kcajinimoeretsmm5.3dna
1
dnahctiwserusolctcatnoc
kcajoeretsinimmm5.3
spucredlos601-0710-11-12-
Pre-cut cables
BNC-5 cables are primarily used for applications that
require RGBHV signals. BNC-4 cables are mainly used for
RGBS signals. Either can be used to route composite video,
S-video or RGB with sync on green. All of these cables
come in lengths from 3 feet to 300 feet, and all have male
BNC connectors on both ends. The BNC-5 HR cables are
also available in a plenum version.
Pre-cut high resolution cables Part number
BNC-4-25’HR (25 feet/7.5 meters) 26-210-04
BNC-4-300’HR (300 feet/90.0 meters) 26-210-53
BNC-5-25’HR (25 feet/7.5 meters) 26-260-03
BNC-5-300’HR (300 feet/90.0 meters) 26-260-14
D-4
Optional Adapter Plates
A variety of optional adapter plates for pass-through
connections may be ordered for the RGB 408 interface. The
RGB 408 can have up to 4 adapter plates installed in one of
the following configurations:
•four adapter plates with a “plate size” of one,
• two adapter plates with a plate size of one and one
adapter plate with a plate size of two,
• or two adapter plates with a plate size of two.
The RGB 408 is shipped with two single height blank plates
(part #70-090-01/-11/-21) and one double height blank
plate (part #70-090-02/-12/-22).
The tables on the following page list some of the available
adapter plates. Contact Extron for a complete list.
2 - BNC
Blank Plate (no connector)
Single Space
Double Space
Blank Plate (no connector)
5 - BNC (Double)
2 - RJ-11
2 - RCA to Solder Cups
3 - RCA to Solder Cups
2 - S-video
1 - D-9 Pass Through Connector
3 - BNC
Architectural adapter plates