- Extron Electronics Cable Box User Manual

TP Receivers • Specifications, Accessories, and Part NumbersTP Receivers • Specifications, Accessories, and Part Numbers
Specifications, Accessories, and Part Numbers cont’d
A-3A-2
Video
Number/signal type ................... 1 or 2 sets of proprietary analog signals
Connectors .................................... 1 or 2 shielded RJ-45 female
Video input — refer to the TP Transmitters Family
User’s Manual, part #68-546-02
Video output
Number/signal type
TP R BNC A,
TP R 15HD A .................... 1 analog RGBHV, RGBS, RGsB,
component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM
composite video from a single source; or
3 NTSC/PAL composite video from a
single source
TP R BNC AV ................... 1 analog RGBHV, RGBS, RGsB,
component video, or S-video; or
1 S-video and 1 NTSC/PAL/SECAM
composite video from a single source; or
3 NTSC/PAL/SECAM composite video
from a single source
and 1 NTSC/PAL/SECAM composite
video
TP R AV ............................ 1 NTSC/PAL/SECAM composite video
Connectors
TP R BNC A ...................... 5 BNC female
TP R BNC AV ................... 6 BNC female
TP R 15HD A .................... (1) 15-pin HD female
TP R AV ............................ 1 BNC female
Nominal level ............................... 1V p-p for Y of component video and
S-video, and for composite video
0.7V p-p for RGB
0.3V p-p for R-Y and B-Y of component
video, and for C of S-video
Minimum/maximum levels ...... 0.3V to 1.45V p-p
Impedance .................................... 75 ohms
Audio
Number/signal type ................... 1 or 2 sets of analog proprietary signals
Connectors .................................... 1 or 2 shielded RJ-45 female
Frequency response ..................... 20 Hz to 20 kHz, ±0.05dB
THD + Noise ................................ 0.03% @ 1 kHz, 0.3% @ 20 kHz at rated
maximum output drive
S/N ................................................ >63dB at nominal level
Crosstalk ....................................... <-80dB @ 1 kHz, fully loaded
Stereo channel separation .......... >80dB @ 1 kHz
CMRR ............................................ >33dB @ 20 Hz to 20 kHz
Audio input — refer to the TP Transmitters Family
User’s Manual, part #68-546-02
Audio output
Number/signal type
TP R BNC A,
TP R AV ............................ 1 stereo audio balanced/unbalanced, and
1 stereo audio unbalanced
TP R 15HD A .................... 1 stereo audio balanced/unbalanced
TP R BNC AV ................... 2 stereo audio balanced/unbalanced, and
2 stereo audio unbalanced
Connectors
TP R 15HD A .................... (1) 3.5 mm, 5-pole captive screw connector
per input
All other models .............. 2 female RCA (left/right) per input
(1) 3.5 mm, 5-pole captive screw connector
per input
Impedance .................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ...................................... ±0.1dB channel to channel
Maximum level (600 ohm) ......... >+11.5dBm, balanced at stated %THD+N
General
Power
TP R BNC A, TP R AV .... 15VDC, 0.8 A, external power supply.
Product requires 0.3 A (minimum).
TP R 15HD A .................... 15VDC, 0.8 A, external power supply.
Product requires 0.34 A (maximum).
TP R BNC AV ................... 100VAC to 240VAC, 50/60 Hz, 40 watts,
internal
Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) /
10% to 90%, non-condensing
Operating +32° to +122°F (0° to +50°C) /
10% to 90%, non-condensing
Rack mount
TP R AV ............................ No, but projector mountable with optional
mounting kit (#70-077-04), furniture
mountable with optional mounting
brackets (#70-077-01 and #70-077-02).
Specifications, Accessories, and Part Numbers