- Extron Electronics Universal Interfaces User's Manual

RGB 130

xixi

134

xixi

150

xi xi

xi Controls and Installation

Controls and Installation, cont’d

2-9

To mount the interface through a desk or table, do the

following:

1. Attach the mounting brackets to the interface using

four machine screws and washers (supplied with the

mounting kit), as indicated in figure 2-9.

Figure 2-9 — Attaching the through desk

brackets

2. Using the to-scale template at the back of this manual

to guide you, mark the four screw holes on the

underside of the surface to which you are mounting

the interface. Use the through desk mounting

template to cut the hole.

3. Drill four pilot holes, each 3/32” in diameter by 1/4”

deep, where marked.

4. Using the four wood screws provided, attach the

brackets to the mounting surface, as shown in

figure 2-10.

Figure 2-10 — Mounting the interface in a

table

BUFFERED LOCAL

MONITOR OUTPUT

INPUT

H. SHIFT