- Extron Electronics Universal Interfaces User's Manual

RGB 130

xixi

134

xixi

150

xi xi

xi Controls and Installation

Controls and Installation, cont’d

2-13

3. Slide the audio cable connector into the audio output

connector on the interface.

Balanced audio

To attach the interface to a balanced audio system, do the

following:

1. Attach the audio cable to a balanced speaker input

connector (tip, ring, and sleeve).

2. Attach the audio cable to the audio cable connector

(Extron part number 10-319-10). Fasten the captive

screws inside the audio cable connector as shown in

figure 2-14.

Connect the sleeve(s) to ground (GND).

Connecting the sleeve(s) to a negative (-)

terminal will damage audio output circuits.

3. Slide the audio cable connector into the audio output

connector on the interface.

Tip (+) Sleeve

Tip (+)

Ring (-)

Sleeve

Balanced Output

Tip

Ring

Sleeve (s)

Tip

Ring