User Guide

3-5USP 405 • Serial Communication
Horizontal size
Increase the horizontal size +: Hsz Widen the picture.
Decrease the horizontal size -: Hsz
Make the picture narrower.
Vertical size
Increase the vertical size +; Vsz Make the picture taller.
Decrease the vertical size -; Vsz
Make the picture shorter.
Horizontal detail filter – RGB & HDTV only
Set a specific filter value
X10
D Dhz
X10
Set the horizontal detail level.
Increment +D Dhz
X10
Increase the horizontal detail.
Decrement -D Dhz
X10
Decrease the horizontal detail.
View the horizontal filter value D
X10
Show the horizontal detail
level.
Vertical detail filter – RGB & HDTV only
Set a specific filter value
X10
d Dvz
X11
Set the vertical detail level.
Increment +d Dvz
X11
Increase the vertical detail.
Decrement -d Dvz
X11
Decrease the vertical detail.
View the vertical filter value d
X11
Show the vertical detail level.
Detail filter – all other formats except RGB & HDTV
Set a specific detail filter value
X10
D Dhz
X10
Set the detail level.
Increment +D Dhz
X10
Increase the detail.
Decrement -D Dhz
X10
Decrease the detail.
View the detail filter value D
X10
Show the detail level.
Top blanking
Specify a top blanking value
X18
( Blt
X18
Set the number of lines to
blank at the top of the picture.
Increase the top blanking value +( Blt
X18
Increase the # of top lines
blanked.
Decrease the top blanking value -( Blt
X18
Decrease the # of top lines
blanked.
View the top blanking value (
X18
Show the number of lines that
are blanked at the top of the
picture.
Bottom blanking
Specify a bottom blanking value
X18
) Blb
X18
Set the number of lines to
blank at the bottom of the
picture.
Increase the bottom blanking value +) Blb
X18
Increase the number of lines
blanked at the bottom.
Decrease the bottom blanking value-) Blb
X18
Decrease the number of
bottom lines blanked.
View the bottom blanking value )
X18
Show the # of bottom lines
that are blanked.
Freeze
Enable 1F Frz1 Output a “frozen” video
image.
Disable 0F Frz0 Turn off freeze (output motion
video).
Command/response table for SIS commands (continued)
Command ASCII Command Response Additional description
(host to USP) (USP to host)
(Continued)