BNC Mini-High Res, 75-Ohm Termination Kit Connector Installation Guide (60-073-01) 68-197-02 02 02 Rev.
Precautions Safety Instructions • English This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock. Warning Power sources • This equipment should be operated only from the power source indicated on the product.
BNC Termination Kit Instructions ______ This document is a compilation of Extron’s instructions, together with copies of AMP® Instruction booklets that are provided with each of the AMP tools included in this kit.
BNC Connector Installation Introduction Use these instructions to install BNC connectors on Extron’s 75 ohm Super HighResolution coax cable. The kit includes the following required tools: • AMP® Coaxial Cable Stripper • AMP® Pro-Crimper (with dies to crimp both center contacts and the ferrules) • Wire Cutters/Strippers Before using each of the AMP tools, go to the appropriate section of this document for instructions. Cable-Stripping Procedure .
BNC Connector Installation 1 BNC Plug Body Shielding Center Pin Plastic Tube Conductor Support Sleeve 2 Color-coded Heat Shrink Tube Ferrule Outer Insulation Plastic Tube 3 Center Pin 4 Center Contact - flange flush with edge of die Crimp Center Contact 5 BNC Plug Body 6 Slide Ferrule over Shielding and support sleeve 7 Ferrule - small dia.
BNC Connector Installation Mini coax 3 Extron • 75 Ohm BNC Termination Kit • User’s Guide
BNC Connector Installation If setup is required, use RG174 side of the red gauge block.
BNC Connector Installation 5 Extron • 75 Ohm BNC Termination Kit • User’s Guide
BNC Connector Installation Extron • 75 Ohm BNC Termination Kit • User’s Guide 6
BNC Connector Installation 7 Extron • 75 Ohm BNC Termination Kit • User’s Guide
BNC Connector Installation Warning: The die retaining pins must be in place or the connector may skew and jam.
BNC Connector Installation 9 Extron • 75 Ohm BNC Termination Kit • User’s Guide
BNC Connector Installation Extron • 75 Ohm BNC Termination Kit • User’s Guide 10
BNC Connector Installation 11 Extron • 75 Ohm BNC Termination Kit • User’s Guide
Extron’s Warranty Extron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purchase.
www.extron.com Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Asia Extron Electronics, Japan 1230 South Lewis Street Anaheim, CA 92805 USA 714.491.1500 Fax 714.491.1517 Beeldschermweg 6C 3821 AH Amersfoort The Netherlands +31.33.453.4040 Fax +31.33.453.4050 135 Joo Seng Road, #04-01 PM Industrial Building Singapore 368363 +65.6383.4400 Fax +65.6383.4664 Daisan DMJ Building 6F 3-9-1 Kudan Minami Chiyoda-ku, Tokyo 102-0074 Japan +81.3.3511.7655 Fax +81.3.3511.
