Manualshelf

User`s manual

ManualsBrandsExtron electronics Manualsaudio & home theatreDigital Video Transmitter and Receiver DVI 201 Tx
12345678910
DVI 201 Tx/Rx • Introduction
Introduction
DVI 201 Tx/Rx • Introduction
1-2
1-3
There are two subsets of transmitters and receivers in two
different enclosures or form factors:
• DVI201Tx/Rx— These units are housed in quarter rack
width metal enclosures. They can be set on a tabletop
or mounted in a rack, under or through furniture, or to a
projector pole. The transmitter in this form factor has a
local monitor output.
N
The non-Decora models do not input, transmit, receive,
or output audio.
• DVI201ADTx/Rx— These units are housed in
enclosures that can be mounted in UL standard wall boxes
with Decora
®
-style face plates. These units also convert
computer level audio to balanced or unbalanced stereo
audio.
N
• Anon-Decoratransmitterorreceiverispartially
compatible with a Decora receiver or transmitter.
•
Amixedformfactorsystemcan transmit and receive
video and RS-232 communications.
•
Amixedformfactorsystemcannot handle audio,
as the non-Decora models do not input, transmit,
receive, or output audio.
The units can be purchased as a pair (of the same form factor)
or individually. Each purchased pair and each individual
transmitter is shipped with a single external desktop 12 VDC
power supply that accepts 100 to 240 VAC, 50 Hz or 60 Hz input.
A single power supply connected to either the transmitter or the
receiver can power both units through one of the TP cables that
link the units.
About this Manual
This manual contains information about the Extron
DVI 201 family of Digital Visual Interface (DVI) video
transmitters (Tx) and receivers (Rx), including how to install,
operate, and congure them.
About the DVI 201 Transmitters and Receivers
The Extron DVI 201 is a family of DVI transmitters and
receivers, in enclosures that support different mounting options.
A transmitter and receiver pair extends the usable distance
of DVI digital video and RS-232 control signals over two
Category (CAT) 5/5e/6/7 unshielded twisted pair (UTP) or
shielded twisted pair (STP) cables. The DVI 201 A D transmitter
and receiver also route audio, butnotontheTPlink. The video
and control (and audio, if applicable) signals can be transmitted
up to 200' (60 m).
DVI 200 TX SERIES
LOCAL OUTPUT
DV INPUT
Multimedia
PC
Projector
Extron
DVI 201 Tx
Transmitter
Extron
DVI 201 Rx
Receiver
DVI Cable
DVI 200
CONTROL
PASS THRU
DVI-D OUTPUT
Tx Rx
RS-232
Control
CAT 5/5e/6/7 UTP up to 200’
RS-232
Figure 1-1 — Typical transmitter and receiver application
A DVI 201 system consists of a transmitter (Tx) and a receiver
(Rx). The pair can handle a single link of DVI-D digital video
and a bi-directional RS-232 link. The DVI 201 A D also converts
a computer audio input into balanced or unbalanced stereo
audio output.