User`s manual

DVI 201 and HDMI 201 Tx/Rx • Reference Information
Reference Information
DVI 201 and HDMI 201 Tx/Rx • Reference Information
A-2 A-3
Specifi cations
DVI 201 Tx/Rx Specifi cations
N
This product consists of a transmitter (DVI 201 Tx) and a receiver
(DVI 201 Rx) with twisted pair cables linking the transmitter and
receiver.
Interconnection between transmitter and receiver
Connectors ..................................... (2) RJ-45 per unit for 2 CAT 5/5e/6 cables
connecting the transmitter and receiver
Bit rate ............................................. 5 gigabits/second total (1.65 gigabits/
second/color)
Signal transmission distance
1600x1200 @ 60 Hz (the highest resolution of the single link DVI
standard)
CAT 7 cable ................ 125' (38 m)
CAT 5/5e/6 cable ...... 100' (30 m)
HDTV (1080i or 720p) or 1024x768 @ 60 Hz
CAT 5/5e/6/7 cable . 200' (60 m)
N
The transmission distance varies greatly depending on the signal
resolution and on the type of cable, graphic card, and display used in the
system.
Signal types and standards
Digital video ................................ RGB digital video (DVI and HDMI*
standards), actively buffered
YCrCb digital component video (HDMI
standard), actively buffered
(All single link DVI and HDMI* signal
formats are supported including 640x480
@ 60 Hz through 1600x1200 @ 60 Hz
computer video, and also 480p, 720p,
1080i, and 1080p HDTV signals)
N
*An optional HDMI to DVI adapter is required if an HDMI signal is
used.
HDCP ............................................. HDCP (High-bandwidth Digital Content
Protection) using the DVI and HDMI
standards (for video, actively buffered,
transmitted through DDC lines)
N
*An optional HDMI to DVI adapter is required if an HDMI signal is
used.
Digital audio ................................ HDMI* audio, actively buffered
(transmitted through RGB and YCrCb
lines)
N
*An optional HDMI to DVI adapter is required if an HDMI signal is
used.
RS-232 ............................................ RS-232 serial data (pass-through)
CEC ................................................ Consumer Electronics Control (CEC)
wired infrared data using the HDMI
standard (pass-through)
N
*An optional Extron HDMI to DVI adapter is required in order to
transmit a CEC signal.
EDID (DDC) ................................. EDID (Extended Display Identifi cation
Data) and DDC (display data channel)
using DVI and HDMI* standards (actively
buffered)
N
*An optional HDMI to DVI adapter is required if an HDMI signal is
used.
HPD ............................................... HPD (Hot Plug Detection of display, pass-
through)
Video input and loop-through (DVI 201 Tx)
Number/signal type ..................... 1 DVI-D/HDMI* input,
1600x1200 @ 60 Hz max. resolution
1 DVI-D/HDMI* local loop-through
N
*An optional HDMI to DVI adapter is required if an HDMI signal is
used.
Connectors ..................................... 2 DVI-D female
Video output (DVI 201 Rx)
Number/signal type ..................... 1 DVI-D/HDMI*, 1600x1200 @ 60 Hz max.
resolution
N
*An optional HDMI to DVI adapter is required if an HDMI signal is
used.
Connectors ..................................... 1 DVI-D female