Quick Start Owner's manual

ManualsBrandsExtron Electronics ManualsHardwareES3610_11

Please take a couple of minutes to read this leaflet. It provides

essential information to help you to start using the VN-GLIMPSE

RGB ADAPTER as quickly as possible. If you need more details

please view the full User Guide included on the Software Disc.

Before You Do Anything Else...

Summary of content (8 pages)

PAGE 1
Before You Do Anything Else... Please take a couple of minutes to read this leaflet. It provides essential information to help you to start using the VN-GLIMPSE RGB ADAPTER as quickly as possible. If you need more details please view the full User Guide included on the Software Disc.
PAGE 2
Checking the Contents of the Box Before using or installing this unit check that the following items have been supplied: • VN-GLIMPSE RGB ADAPTER • 12V Power Supply Unit (PSU) • Mains Power Cords (2 off) 3-pin plug version – for USA customers unterminated version – for Europe and elsewhere (see Plug Wiring Details below) • Mouse/Keyboard Cable (2 metre PS/2 to PS/2) (2 off) • Digital Monitor Cable* (2 metre DVI-D to DVI-D) • Analog Monitor Cable* (2 metre 15-pin HD-type to DVI-A) • DVI-A to 15-pin HD-type A
PAGE 3
System Basics The following diagram shows the basic system and interconnections for using a VN-GLIMPSE RGB ADAPTER. The VN-GLIMPSE RGB ADAPTER captures the source graphics and streams this data onto a network. The resulting VN-GLIMPSE source can then be viewed using: • a VN-GLIMPSE enabled VISIONETWORK Processor, or • the VN-GLIMPSE VIEWER application, which can be installed on any computer on the same network, or • the VN-GLIMPSE ADMINISTRATOR application.
PAGE 4
Connection Diagram (Digital Source) Page 4 I449GB issue 3
PAGE 5
Connection Diagram (Analog Source) I449GB issue 3 Page 5
PAGE 6
Installing the Software The Software Disc contains the full User Guide (in Acrobat PDF) together with the following software applications: • VN-GLIMPSE Setup Utility used to configure the ADAPTER network parameters. This utility can be installed either on a separate computer/laptop or on the source computer. • VN-GLIMPSE VIEWER used to view a VN-GLIMPSE source (TCP Unicast only) on a remote computer.
PAGE 7
Using the VN-GLIMPSE Setup Utility Setting the IP Address The IP Address of the VN-GLIMPSE RGB ADAPTER must be set within the range of valid addresses for the network and must not be in use by another network device. It also supports DHCP networks. Consult the network administrator for advice on which address to use or if DHCP should be used. The IP Address can only be changed using the VN-GLIMPSE Setup Utility provided on the Software Disc.
PAGE 8
Using the VN-GLIMPSE VIEWER Connecting and Disconnecting a Source Viewing Options The selected source will appear in the left-hand panel. By default this will be scaled to fit the available viewing space. Click the Unity button to show the source at its native resolution. Scroll bars will appear allowing you to select which part of the source frame you want to view. Click Full Screen to maximize the display area.