User`s manual

FOX 4G DA8 • Remote Control
Remote Control, cont’d
3-8
FOX 4G DA8 • Remote Control
3-9
4. Follow the on-screen instructions. By
default, the Windows installation creates a
C:\Program Files\Extron\FOX_Extenders directory, and it
places the following four icons into a group folder named
“Extron Electronics\FOX Extender WCP”:
  • CheckforFOXExtenderupdates
  • FOXExtenderWCP
  • FOXExtenderHelp
  • UninstallFOXExtenderWCP
Starting the program
Start the Extron FOX Extender program as follows:
1. Connect a Windows-based computer to either of the DA's
serial ports. See chapter 2, “Installation and Operation”,
for more details.
2
. ClickStart > Programs > Extron Electronics >
FOX Extender WCP > FOX Extender WCP.
The Communication Setup window appears (figure 3-5).
Figure 3-5— Communication Setup window
3. SelecttheComporttowhichyourDAisconnected.Click
OK.
The FOX Extender program window appears (figure 3-6).
Mute or unmute individual outputs or all outputs by
clickingtheappropriatebuttons.
N
The channel mute command mutes the data on the output
only. The output continues to emit light.
Figure 3-6 — FOX Extender program window
Firmware upgrade
Firmware can be upgraded via the unit's front panel
Configuration port only, using the Extron Firmware Loader
utility from the FOX Extender program.
Uploadreplacementrmwareasfollows:
1. Visit the Extron web site, www.extron.com,clickthe
Download Centertab,andthenclicktheFirmwarelink
(figure 3-7). Select the appropriate firmware file(s) to
download and copy it (them) to your computer. Note the
folder to which you save the firmware file(s).
Figure 3-7 — Location of firmware upgrade files
2. IntheWindowsExplorerorotherlebrowser,double-click
the downloaded executable (*.exe) file(s) to self-extract the
firmware file(s).
3. Connect a Windows-based computer to the front panel
Configuration port of the unit to be updated. See
chapter 2, "Installation and Operation", for more details.
4. Start the FOX Extender program. See "Starting the
program", on page 3-8.