User guide
Table Of Contents
- JMP 9600 Cover
- Contents
- Introduction
- Installation
- Operation
- HTML Operation
- Programming Guide
- Detailed System Interaction
- Mounting and Maintenance
- Ethernet Connection
- Reference Information
- Warranty and Contact Info
Menu System Overview
Power-on Sequence
Plug either or both power cords into power sources and turn on ( ) one or both rear panel
power switches. When AC power is applied, the media player performs a self-test that blinks
all of the front panel buttons several times and then displays the LCD start-up screen while
it continues to load the operating system (see figure 9). After approximately 40 seconds,
the LCD window displays the main menu screen. An error-free power-up self-test sequence
leaves all of the buttons except Stop unlit and the LCD window displaying the main menu.
40 sec.
Power
on
Figure 9. LCD Power up Screen and Main Menu
Menu System Flow
Figure 10 shows a owchart of the main menu system.
PREV
ENTER
Ch. 1 Status
Help System Status
Settings
Lock
Ch. 2 Status
(About)
(License
Keys)
Figure 10. Main Menu Flowchart
NOTE: The elements in figure 10 are not drawn to scale.
Encoder knob — Rotate the encoder knob to navigate through the main menu and
submenu options.
Enter button — Press the Enter button to activate the highlighted function.
Previous button — Press the Previous button to “back up” to the previously displayed
menu or page.
NOTES: • You cannot back up past the main menu screen shown in figure 10.
• In the procedures that follow, the term “highlight” means blue fill, unless
otherwise described.
JMP 9600 Media Player • Operation 16