User guide

Channel 1 and 2 Control and Status Windows
The Channel Control panel portion of the Player Control page consists of one or two control
and status windows that display information unique to the output channels.
NOTES: • The Channel 2 control and status window is displayed only in 2-channel
output mode and 2-channel locked output mode, both of which can be
selected from the HTML Setup > Video > Mode dialog box submenu.
• The Channel 1 Status and Channel 2 Status are identical, except where noted.
Each channel window displays the real-time status information for the current content in the
upper half of the window and transport controls in the lower half of the window.
Real time status display
Figure 36. Real Time Status Display
Timecode
— The Timecode counter shows the current point in
time within the loaded program. The Timecode counter includes the pre-roll, roll, and post-
roll periods.
Frame
— The Frame counter shows the current point in time within
the currently loaded playlist or clip; the roll period only. The Frame counter runs in sync with
the Timecode counter but when paused, the actual frame is displayed.
Duration
— The Duration display shows the entire run-time of the
currently loaded playlist or clip. This is a static display only.
NOTE The frame field of the Timecode and Frame counters is not updated during
playback; only the hour:min:sec fields are active. The Timecode and Frame
counters show the frame number when paused, in Frame mode, or in shuttle
mode.
Playlist
— The Playlist field shows the name of the currently loaded
playlist. If this field is empty, no playlist is loaded.
Clip — The Clip field shows the name of the currently
loaded clip. If this field is empty, no playlist is loaded.
Clip Info — The Clip Info field
describes the currently loaded clip, whether it is a stand-along clip or part of a playlist.
JMP 9600 Media Player • HTML Operation 39