User Guide User Manual

Configuration Worksheets
Rather than trying to remember the configuration for each preset, use worksheets to record
this information. Make copies of the blank worksheet on page 87 (32-input button
and -output button switchers)) and page 88 (16-input button and 12-input button
switchers) and use one for each preset configuration. The worksheets accommodate all of
the CrossPoint and MAV Plus models. Cross out all unused or inactive inputs and outputs.
Use different colors for video and audio.
NOTE: All of the equipment in the following examples is connected through the
appropriate input board, output board, transmitter, or receiver.
Worksheet Example 1: System Equipment
Figure 58 shows a worksheet for a CrossPoint 450 Plus 2424 HVA in a fictional
organization with the system hardware annotated. Inputs 10, 11, and 21 through 24 have
no connections in this organization, so they have been crossed out on the worksheet. A
CrossPoint 450 Plus 2424 does not have inputs 25 through 32, so they are crossed out.
Similarly, outputs 7, 14, 15, 16, and 25 through 32 are crossed out.
Worksheet Example
26 27 28 29 30 31 32
26 27 28 29 30 31 32
17 18 19 20 21 22 23 24
17 18 19 20 21 22 23 24
25
25
Main
Hall
PJ#1
Main
Hall
PJ#2
Podium
monitor
VCR
(USP 405)
Lobby
monitor
Class
room #1
monitor
Class
room #2
monitor
Demo
room
PJ #1
Demo
rack
monitor
Demo
rack
switcher
Conf.
room
Sound
system
#2
Camera
main
podium
Podium
Mic
PC1
RGB 201
Rxi
Classroom
#1 VCR
(DVS 406)
Classroom
#2 VCR
(DVS 406)
Laptop
RGB 201
Rxi
Demo
wallbox
#1
Demo
wallbox
#2
Demo
wallbox
#3
Demo
wallbox
#4
Demo
wallbox
#5
Demo
wallbox
#6
Demo
wallbox
#7
Demo
wallbox
#8
Demo
rack #1
USP 405
Demo
rack #2
USP 405
Demo
rack #3
USP 405
Demo
rack #4
USP 405
Rack DVD
(DVS)
Floorbox
#1
Floorbox
#2
Floorbox
#3
Floorbox
#4
Audio
CD
VTG
400
Camera
#2
Figure 58. Worksheet Example 1: System Equipment
Inputs include PCs, an audio CD player, cameras, and an Extron VTG 400. Output devices
include monitors, front and rear projectors, a stereo, and a VCR for recording presentations.
The Extron VTG 400 video test generator connected to input 12 enables a video test
pattern to be sent to one, several, or all output devices for problem isolation or adjustment
purposes. An audio test tape or CD could be used in a similar manner to check out the
audio components.
CrossPoint and MAV Series Matrix Switchers • Operation 84