Setup guide

SMX System MultiMatrix Switchers • Programmer's Guide
Programmer's Guide, cont’d 4-8
Also refer to the SMX System MultiMatrix Switchers User’s Manual at www.extron.com.
N
X@ = Input number 01 – (maximum number of inputs for your model), 00 = untied
X# = Output number 01 – (maximum number of outputs for your model)
X2! = Firmware version number
X2@ = Plane number X2^ = Fan speed (rpm)
X2$ = Voltage (+ or - voltage) X7& = Primary power supply (0 = not installed, 1 = OK
X2% = Temperature X7* = Secondary (redundant) power supply (0 = not installed, 1 = OK)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional description
Information requests
N
Firmware version/part number/information is for the primary frame only.
Query firmware version Q
X2!
]
The firmware version is 1.00 (sample
value).
Example:
Q
1.00
]
Ver01*
X2!
]
(verbose response)
Query system status S
X2$•X2$•X2$•X2%•X2^•X2^•X7&•X7*
]
Example:
S Sts0* 3.31 4.98 24.22 +100.40 03305 03308 1 0
]
(verbose response)
3.31 and 4.98 are power supply voltages; 24.22 is fan voltage, 100.40
(degrees F) is the temperature, 03305 is fan 1 rpm, 03308 is fan 2 rpm, 1 is
primary power supply (OK).
Query switcher information (general)
per plane (16 actual and 10 virtual)
plus board configuration
I
V
X@
0
XX#
0
AX@
0
XX#
0
• ...VX@
16
XX#
16
AX@
16
XX#
16
•
...
VX@
25
XX#
25
AX@
25
XX#
25
]
V16x16A16x16
•
V--X--A--X--
•
V--X--A--X--
•
V--X--A--X--
•
...V--X--A--X--]
N
The I response gives 26 parameters, the first 16 (V_x_A_x_) are plane information (planes 0-15), and the next are virtual planes 1-10 (90-99).
Query plane address per slot
ESTAT
}
X2@
(slot 1)
•X2@
(slot 2)
•...X2@
(slot 6/8/10)
]
Stat
X2@
(slot 1)
•X2@
(slot 2)
•...X2@
(slot 6/8/10)
]
(verbose response)
Slot 1 2 3 4 5 6 7 8 9 10
Example: stat 00•01•--•02•--•--•03•--•03•03
]
(5U frame, 10 slots)
Slot 1 00 the board address installed in slot 1 is plane 00
Slot 2 01 the board address installed in slot 2 is plane 01
Slot 3 -- No board installed