User guide

SMX System MultiMatrix Switcher • HTML Configuration and Control 104
Presets Page
The Presets page allows global and plane presets to be saved to one of 32 locations for
global presets, or to one of the 10 locations for plane presets.
NOTE: Global presets save and recall configurations for all planes, and plane presets
save and recall configurations for a specific plane, not affecting other planes.
Saving the current configuration as a global preset
1. In the Global Presets section, click Save Preset. The button changes to Select
Preset...
, and grays out.
NOTE: All unassigned buttons become active. The plane preset field grays out.
2. Select the desired preset by clicking one of the preset buttons.
• To create a new preset, click one of the [unassigned] buttons.
• To overwrite an existing preset, click its button.
3. Enter a name for the preset in the text field.
NOTES:
• Preset names are limited to 12 characters. Valid characters are
0 - 9, a - z, A - Z, _ : = / and space
• The following characters are invalid or not recommended in the preset names: +
~ , @ = ‘ [ ] { } < > “ ; : | \ ?
4. Click the Accept button.
If you do not rename an unassigned button, the SMX names the preset as Preset nn (where
nn corresponds to the next global preset number).
The SMX retains the same preset name if it is not renamed when it is overwritten.