User guide

SMX System MultiMatrix Switcher • SIS Configuration and Control 45
Command ASCII Command
(Host to Switcher)
Response
(Switcher to Host)
Additional Description
Front Panel Lockout (Executive Mode)
Lock front panel
(advanced functions)
2X
Exe2
]
Enable lock mode 2.
Lock front panel
1X
Exe1
]
Enable lock mode 1.
Unlock front panel
0X
Exe0
]
Disable lock mode.
View front panel lock
X
X1&]
Show lock mode status.
NOTE: For full lock mode details, see Setting the Front Panel Locks (Executive Modes) on page 25.
Information Requests
NOTE: Firmware version/part number/information Primary BME only.
Query firmware version
Q
X2!]
Example:
Q
1.14
]
Ver01*X2!]
The firmware version is
1.14.
Verbose mode 2 or 3
Query firmware and build
version
*Q
X2!]
BldX2!] Verbose mode 2 or 3
Query kernel firmware and
build version
**Q
X2!]
LibX2!] Verbose mode 2 or 3
Query verbose version
information
0Q
Sum of responses from 2Q-3Q-4Q
]
Ver00* sum of responses from 2Q-3Q-4Q] verbose response
NOTE: The firmware that is currently running is marked by an asterisk (*). A question mark (?.??) indicates that only
factory firmware is loaded. A caret (^) indicates the firmware that should be running, but a Mode 1 reset was executed
and the default factory version is loaded. An exclamation point (!) indicates corrupted firmware.
Example 0Q
Response: Description * indicates the version running Upload date and time
| | |
1.23 - 0.14(0.20-SMX Series - Wed, 04 Jan 2006 23:11:29 GMT) - 1.00*(0.24-SMX Series - Thu, 20 Apr 2007 20:02:35 GMT)
Ethernet protocol SMX firmware version Updated firmware version
firmware
Query firmware version
1Q
X2!]
Ver01*X2!] Verbose mode 2 or 3
Query bootstrap version
2Q
X2!]
Ver02*X2!] Verbose mode 2 or 3
Query factory firmware
version
3Q
X2!] (plus web ver.-desc-upload date/time)
Ver03*
X2!] (plus ver.-desc-upload date/time)]
Verbose mode 2 or 3
Query updated firmware
version
4Q
X2!] (plus web ver.-desc-upload date/time)]
Ver04*X2!] (plus web ver.-desc-upload date/time)]
Verbose mode 2 or 3
NOTE: The 3Q and 4Q responses indicate the web version, a brief description (model used on), and the date the last
version was uploaded. For example, a typical 4Q response is; [1.14*(1.77-SMX Series -Wed, 01 Apr 2011
18:35:43 GMT)], indicating loaded firmware version is 1.14, web version is 1.77 for the SMX, uploaded Wednesday,
April 1st 2011 at 6:35 pm GMT).
NOTES:
X1& = Lockout mode status: 0 = disabled, 1 = enabled, 2 = enabled (basic only)
X2! = Version number x.xx