User Guide User guide

5-5
MVX Plus 128 VGA A Matrix Switcher • Matrix Software
PRELIMINARY
If the address is not correct: Either click in the Extron IP Address field
and enter the IP address or click on the scroll down button ( ) and select
from among the recently used addresses. Proceed to step 3b.
N
If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
b. If the switcher is password protected, click in the Password field and
enter the enter the appropriate administrator or user password.
c. Click Connect.
If you logged on using the administrator password, the Windows
program connects you to the MVX Plus 128 VGA A switcher with all of
the administrator rights and privileges.
If you logged on using the user password, the Windows program
connects you to the MVX Plus 128 VGA A switcher with only user
capabilities.
If an incorrect password was entered, the program beeps and returns to
the password entry display.
4. The Extron Matrix Switchers Control Program window (figure 5-5 and
figure 5-6) appears. The window displays the current configuration of the
attached matrix.
Figure 5-5 — Extron Matrix Switchers Control Program window (no ties)