User Guide User guide

5-19

MVX Plus 128 VGA A Matrix Switcher • Matrix Software

PRELIMINARY

Print tie map — Prints the tie set that is displayed on the screen.

Exit — Closes the Matrix Switchers Control Program.

Tools menu

Assign device icons — Displays the complete set of input

and output device icons. You can drag any of these

icons to the input and output boxes.

Edit device palette — Allows you to add your own custom

device icon graphics.

RGB delay settings — Displays the switching interval

setting for each input and allows you to change them.

Audio-Input gain settings — Displays the audio gain

level setting for a single input or for all inputs and

allows you to change it. The level is expressed as

the magnitude (number of decibels) and polarity

(positive, gain or negative, attenuation) of the audio

adjustment.

Audio-Output volume settings — Displays the audio output level setting for

a single input or for all inputs and allows you to change it. The level is

expressed as a percentage of the input audio volume that is applied to the

output; 0% is full attenuation (audio is silent), 100% is full volume.

Mute-Output settings — Displays the RGB Delay, Volume, and Mute Adjust screen,

which allows you to mute and unmute individual or all video and audio

outputs.

View input frequencies — (DSVP) Displays the input horizontal and vertical

frequencies for each input.

Update firmware — Allows you to replace the ﬁrmware that is coded on the

switcher’s control board without taking the switcher out of service, opening

the switcher enclosure, and replacing the ﬁrmware chip set. See “Updating

ﬁrmware” on page 5-13.

IP options — Allows you to set IP options. See “IP Settings/Options window” on

page 5-6.

HTML file manager — Displays a list of HTML ﬁles installed on the switcher and

allows you to upload custom ﬁles from a connected PC to the switcher. See

“Uploading HTML ﬁles” on page 5-14.