User Guide User guide

Ethernet Connection, cont’d
MVX Plus 128 VGA A Matrix Switcher • Ethernet Connection
A-4
PRELIMINARY
Connecting as a Telnet client
The Microsoft Telnet utility is available from the DOS prompt. Telnet allows you
to input SIS commands to the MVX Plus 128 VGA A switcher from the PC via the
Ethernet link and the LAN.
Access the DOS prompt and start Telnet as follows:
1. On the Windows task bar, click on Start > Run.
2. At the Open prompt, type command.
3. Click the OK button.
4. At the DOS prompt, type telnet and then press [Enter]. The computer returns
a display similar to figure A-3.
Microsoft (R) windows 2000 (TM) Version 5.0 (Build 2195)
Welcome to Microsoft Telnet Client
Telnet Client Build 5.00.99203.1
Escape Character is 'CTRL+]'
Microsoft Telnet>
Figure A-3 — Telnet screen
Telnet tips
It is not the intention of this manual to detail all of the operations and functionality
of Telnet; however, some basic level of understanding is necessary for operating the
MVX Plus 128 VGA A switcher via Telnet.
Open
Connect to the MVX Plus 128 VGA A switcher using the Open command. Once
you are connected to the switcher, you can enter the SIS commands the same as you
would if you were using the RS-232 link.
Connect to the MVX Plus 128 VGA A switcher as follows:
1. At the Telnet prompt, type open {IP address} and then press [Enter].
If the switcher is not password protected, no further prompts are displayed
until you break or disconnect the connection to the MVX Plus 128 VGA A
switcher.
If the switcher is password protected, Telnet displays the password prompt.
2. If necessary, at the password prompt, type {password} and then press [Enter].
Connection to the switcher via the Ethernet can be password protected. There
are two levels of password protection: administrator and user. A person
logged on as an administrator has full access to all MVX Plus 128 VGA A
switching capabilities and editing functions. Users can select video and/or
audio for output, select test patterns, set RGB and audio mutes, select a blue
screen, and view all settings with the exception of passwords. By default, the
MVX Plus 128 VGA A switcher ships with both passwords set to {carriage
return}.