User Guide User guide

3-25
MVX Plus 128 VGA A Matrix Switcher • Operation
PRELIMINARY
4. Press and release the Esc (
>
) button once (figure 3-37) to increase the RGB
delay by a half second.
Press and release the Esc (
>
) button twice more to increase the RGB delay by a
another full second. Note the input button indication changes that occur each
time the Esc (
>
) button is pressed and released.
Figure 3-37 show the result of pressing the Esc (
>
) button a total of three
times.
ESC ESC ESC
INPUTS
1
2
3
4
5
6
9
10
7
8
1
3.5 4.0 4.5 5.0 3.0 2.5 2.0 1.5 1.0 0.5
Press the Esc button to increase the RGB interval that is applied to switches to
the selected output by a half second per button push.
= Unlit button = Lit button
The Input 1 through Input 10 buttons display the selected output's RGB delay.
Each lit input button indicates half a second of delay.
In this example, the green input buttons display 5.0 seconds of RGB interval.
Figure 3-37 — Adjust the RGB delay interval
5. Press and release the RGBHV button (figure 3-38).
I / O
RGBHV AUDIO
The RGBHV button stops
blinking and goes out or
becomes background
illuminated.
The Audio button lights red.
Press the RGBHV button
to exit RGB delay mode.
All input buttons and output buttons
return to unlit or background illumination.
Figure 3-38 — Deselect RGB Delay mode