User Guide User guide

Operation, cont’d
MVX Plus 128 VGA A Matrix Switcher • Operation
3-28
PRELIMINARY
Example 8: Recalling a preset
In the following example, a preset is recalled to become the current configuration.
The steps show the front panel indications that result from your action.
1. Press and release the Esc button (figure 3-44).
C O N T R O L
PRESET ENTER
ESCVIEW
Press the Esc button to clear all selections.
The button flashes once.
Figure 3-44 — Clear all selections
2. Press and release the Preset button (figure 3-45).
PRESET
1
2
3
Press and release the Preset button.
The Preset button lights.
All input buttons with
assigned presets light red.
Red
(Preset Assigned)
Figure 3-45 — Enter Recall Preset mode
3. Press and release the input or output button for the desired preset
(figure 3-46).
C O N T R O L
PRESET ENTER
ESCVIEW
INPUTS
1
2
3
4
5
6
7
8
9
Press and release the Input 1 button.
The button blinks red to indicate that this
preset number is selected but not recalled.
The Enter button blinks
to indicate the need to
recall the preset.
= Blinking button
Figure 3-46 — Select the preset
4. Press and release the Enter button (figure 3-47). The configuration stored in
the selected memory location is now the current configuration and can be
viewed in the View-only mode (see example 4).
C O N T R O L
PRESET ENTER ESCVIEW
The Enter and Preset
buttons return to unlit or
background illumination.
Press the Enter button to
recall the preset.
All input buttons and output
buttons return to unlit or
background illumination.
Figure 3-47 — Press the Enter button