User Guide User guide

4-15
MVX Plus 128 VGA A Matrix Switcher • Programmer’s Guide
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
View ties, gain, volume, mutes, presets, and DSVP (continued)
View video global preset
configuration
EX1!
*1*1VC
} X@
1
•X@
2
•
...
•X@
16
•
Vid
]
Show preset
X1!
’s video
configuration. Show the
input tied to 16 sequential
outputs, starting from
output 1.
Command description:
Response description:
preset #*starting output # (O# - should always be 1)*1(=video)VC
input # (I#) tied to O#1•I# tied to O#2•I# tied to O#3• ... •I# tied to O#16•Vid
]
Example:
1Output:
Response = tied input:
input 12 tied to output 3
2 3 4 5 6 7 8
08•08•12•08•08•11•00•00
no tied input
input 8 tied to output 4
•--•--•--•--•--•--•--•--•
13 14 15 1609 10 11 12
outputs do not exist
•Vid
Each position shown in the response is an output: left = output 1, right = output 16.
(Outputs 9 through 16 are not present on the MVX Plus 128 VGA A.) The number in each
position is the input tied to that output.
In this example, video input 8 is tied to outputs 1, 2, 4, and 5; input 12 is tied to output 3;
and input 11 is tied to output 6. No inputs are tied to outputs 7 and 8.
N
EX1!
*1*1VC
}
where
X1!
= 0 returns the switcher’s current video configuration.
View audio global preset
configuration
EX1!
*1*2VC
} X@
1
•
X@
2
•...•
X@
16
•Aud
]
Show preset
X1!
’s audio
configuration. Show the
input tied to 16 sequential
outputs, starting from
output 1.
Command description:
Response description:
preset #*starting output # (O# - should always be 1)*2(=audio)VC
input # (I#) tied to O#1•I# tied to O#2•I# tied to O#3• ... •I# tied to O#16•Aud
]
Example:
01 Output:
Response = tied input:
input 1 tied to output 3
02 03 04 05 06 07 08
01•01•01•01•02•12•12•00•--•--•--•--•--•--•--•--•Aud
13 14 15 1609 10 11 12
no tied input outputs do not exist
Each position shown in the response is an output: left = output 1, right = output 16.
(Outputs 9 through 16 are not present on the MVX Plus 128 VGA A.) The number in each
position is the input tied to that output.
In this example, audio input 1 is tied to outputs 1, 2, 3, and 4; input 2 is tied to output 5;
and input 12 is tied to outputs 6 and 7. No input is tied to output 8.
N
EX1!
*1*2VC
}
where
X1!
= 0 returns the switcher’s current audio configuration.
View video room preset
configuration
EX*
*
X1@
*1*1VC
} X@
1
•X@
2
•
...
•X@
16
•
Vid
]
Show room
X*
, preset
X1!
’s
video configuration. Show
the input tied to up to 16
outputs assigned to room
X*
.
Command description:
Response description:
room #*room preset #*starting output # (O# - should always be 1)*1(=video)VC
input # (I#) tied to O#1
•
I# tied to O#2
•
I# tied to O#3
•
...
•
I# tied to O#12
•
Vid
]
View audio room preset
configuration
EX*
*
X1@
*1*2VC
} X@
1
•X@
2
•
...
•X@
16
•
Aud
]
Show room
X*
, preset
X1!
’s
audio configuration. Show
the input tied to up to 16
outputs assigned to room
X*
.
Command description:
Response description:
room #*room preset #*starting output # (O# - should always be 1)*2(=audio)VC
input # (I#) tied to O#1
•
I# tied to O#2
•
I# tied to O#3
•
...
•
I# tied to O#12
•
Aud
]