Specifications

VCR's Remote
Extron
MLC 226 IP DV+
DISPLAY
VOLUME
ON
OFF
AUTO
IMAGE
MUTE
LAPTOP
VCR
DVD
AUX
VIDEO
PC
DVD & VCR CONTROL
MLC 226 IP DV+
Tx
PWR ON: 02 00 01 00
Projector Manufacturers
Manual
Extron
MLC 226 IP
PC Projector
ON
OFF
Free Global Confi gurator Software
MEDIALINK
®
PRODUCTS ARE SIMPLE AND EASY TO CONFIGURE…
NO PROGRAMMING KNOWLEDGE IS REQUIRED
Free Projector Drivers
Extron creates and administers a wide selection of
commonly used projector control drivers. These IR
and serial RS-232 drivers allow MediaLink Controllers
to communicate with a display device. They enable
control of basic projector functions such as power,
input selection, and volume adjustment. Go to the
Extron Web site at www.extron.com to download
drivers for the latest and most popular projectors.
IR Learning
Serial RS-232 is the preferred method of control;
however, many ultra portable projectors can only
support IR control. Various MediaLink Controller
models can learn IR commands from virtually any
IR controllable device. IR learning can also be used
in conjunction with optional IRCM Control Modules
that control source devices such as VCRs, DVD
players, and audio tape decks.
Custom Serial RS-232 Control
In environments where customizable projector
control is needed, integrators can easily enter in
their own RS-232 commands. RS-232 commands
can be assigned to any button using the provided
confi guration software. The MediaLink Controllers
will work with virtually any projector.
Extron-provided software allows
for customized projector control
IR Learning for VCR and DVD controlExtron offers hundreds of drivers from many major
projector and display manufacturers
Extron’s free Global Configurator puts all of the
most commonly used system monitoring and
control options at your fingertips. One of the
costliest aspects of building an A/V resource
management system, in terms of human
resources and time, is programming. A/V system
programming can be a complex task that requires
the skills of an experienced programmer.
Extron’s configuration approach offers
tremendous benefits over traditional system
programming methods, particularly for those who
have medium-to-large installations to connect,
monitor, and maintain. Configuring MediaLink
products is as simple as selecting choices from
intuitive, drop-down menus instead of writing,
compiling, and debugging complicated computer
source code. Should system changes, such as
a new VCR or DVD player, need to be made in
the future, an experienced programmer is not
required.
Nearly Anyone Can Confi gure A System
Non-programmers can use our free Global
Confi gurator software to build a complete A/V asset
management and monitoring system, freeing up
programmers for other projects.
System Changes Take Less Time
Confi guration means that initial system setup time
is reduced, and there’s no need to delay making
changes because you are waiting for a hard-to-fi nd
programming resource.
MLC 226 IP