User Guide Owner manual

5. The Choose Firmware File window opens.
Figure 27. Choose Firmware File Window
6. Navigate to and select the new firmware file, which has a .bin extension, and click
Open. The Choose Firmware File window closes.
CAUTION: The firmware file must have a .bin extension. Uploading other file
types can cause the switcher to stop functioning.
NOTE: When downloaded from the Extron website, the firmware is placed
in a subfolder of C:\Program Files\Extron\Firmware or
C:\Program Files (x86)\Extron\Firmware (for Windows 7).
7. In the Firmware Loader window, click Begin.
The Total Progress and Progress status bars show the progress of the firmware upload.
The upload to the switcher may take several minutes. After the status bars have
progressed from 0% to 100%, and Status is listed as Completed, the firmware loader
utility resets the unit.
7
Figure 28. Progress Status Bars on the Firmware Loader Screen
8. Click Exit to close the Firmware Loader.
PowerCage FOX Tx/Rx AV • Remote Communication and Control 34