Manual

RGB 500 Series • Installation and Operation
Installation and Operation, cont’d
RGB 500 Series
A
Appendix A
Specifications
Interface Specifications
Attaching the faceplate
1. Attach the faceplate to the interface(s) using two 3/8”
(0.95 cm) long #4-40 machine screws (provided) per two-
gang size (four screws total for the RGB 500 Dual,
RGB 508, RGB 560 Dual and RGB 568). Use the illustration
on the opposite page as a guide.
2. Insert the interface and attached cables into the opening in
the wall or furniture, taking care not to damage the cables.
3. Attach the faceplate to the mounting bracket with four
3/8” (0.95 cm) long, #6-32 machine screws (provided). Use
the illustration on the opposite page as a guide.
4. Reconnect the computer video and audio input cables and
(for the RGB 560 series and RGB 568 series) the local
monitor output cable to the interface.
5. Adjust horizontal centering as needed.
2-18