User`s manual

SW Switchers • InstallationSW Switchers • Installation
Installation
1
Auto switch active LED (SW ARxi and SW AR HVxi
only) — Lights to indicate that auto-switch mode is
On. The input mode/selection LEDs on
SW AR MX, SW AR MX HV, and SW 6 Component
switchers accomplish the same function.
2
Input selection buttons — Allow you to select the
input to be displayed. The number of buttons
available depends on the model.
If the Mode switch on the rear panel is set to Auto,
pressing the input selection buttons has no affect.
3
Input/mode selection LEDs — Light to indicate the
active input and, in the case of the SW AR MX,
SW AR MX HV, and SW 6 Component switchers, to
indicate the mode in which the switcher is operating.
4
Power LED — Lights to indicate that power is
supplied to the switcher.
5
Input/mode selection buttons — Allow you to select
the input to be displayed and to select the mode in
which the switcher is operating.
If either Auto-switch mode or Auto-sequence mode
is selected, the buttons do not select the input.
Rear panel features
Figure 14 shows an SW 6 AR HVxi rear panel, and figure 15
shows an SW AR MX HV rear panel. The rear panel
features are the same for all models of SW ARxi and
SW AR HVxi switchers, and for all models of SW AR MX,
SW AR MX HV, and SW 6 Component switchers, except for
the number of available inputs, the presence or absence of
vertical sync input connectors, and in the case of the
SW 6 Component, the names of the input connectors.
Front and Rear Panels
Front panel features
Figure 12 shows an SW 6 AR HVxi front panel, and figure 13
shows an SW 6 AR MX HV front panel. The front panel
controls are the same for all models of SW ARxi and
SW AR HVxi switchers, and for all models of SW AR MX,
SW AR MX HV, and SW 6 Component switchers, except for
the number of front panel buttons and LEDs (light-emitting
diodes).
Figure 12 — SW 6 AR HV
xixi
xixi
xi front panel
Figure 13 — SW 6 AR MX HV front panel
2-32-2
SW 6 AR MX
123456
3
4 5
SW 6 AR HV
1
2
3