User guide
Updating Firmware from a Web Browser
1. Power on a computer that is connected to the same network as the TLP 710.
2. From the Extron website (www.extron.com), download the firmware for the
touchpanel.
a. Click the Download tab on the Extron home page
b. Select the Firmware option (see figure 23).
c. Navigate to the touchpanel firmware and click Download.
This downloads the firmware to your computer. Note the folder in which the firmware
file is saved.
3. Open your browser and type the IP address of the TLP 710 unit into the address box.
The browser opens the TouchLink panel web pages (see page 19).
Figure 25. Firmware Upgrade Web Page
4. Click the Configuration tab at the top of the page and then select
Firmware Upgrade from the sidebar on the left.
5. Click the Browse button and navigate to the firmware file that was saved in step 4.
6. Click Upload. The Touchpanel screen shows the message “Firmware Uploading...
Please Wait...”. When the rmware is uploaded, the screen shows the message
“Restarting...”. Once the firmware is installed, the panel can be calibrated using the
on-screen menus (see page 14) or the TouchLink panel web pages (see page 19).
TLP 710MV and TLP 710TV • Conguration Software 23