User guide

Removing the TLP 710TV Base for VESA Mounting
Notch to Remove
Base Cover
Notch to Remove
Back Cover
Figure 45. Removing the Back and Base Covers
1. Remove the back cover by inserting the Extron removal tool (provided) into the
notches on each side and prying off the cover.
2. Remove the base cover using the Extron removal tool.
VESA mounting hole (4)
Hinges (2)
Cable Runway
Spanner Drive
Security Screws
(2 for each hinge)
Figure 46. Removing the Base from the Touchpanel
TLP 710MV and TLP 710TV • Mounting 45