Installation guide

4. Mount the receiver housing to the

surface.

If not using a raceway:

Mount the receiver housing and base to the surface, using

the appropriate screws for the type of surface. (Screws

and wall anchors are not included.)

If using a raceway:

a. Position the receiver housing with the raceway

inserted through the knockout.

b. Mount the receiver housing and base to the surface,

using the appropriate screws for the type of surface.

(Screws and wall anchors are not included.)

Mount the receiver housing to the

mounting surface using screws.

If using a raceway, insert the

raceway through the knockout, then

mount the housing.

VoiceLift Microphone Installation • Installation — Stage 1

2-8

Installation — Stage 1, cont’d