Specifications

N E W P R O D U C T S
34
www.extron.com
© 2014 Extron Electronics. All rights reserved.
Prices and specifications subject to change without notice.
USA West
+1.714.491.15 00 / +800.633.9876
+1.714.491.1517 FAX
USA East
+1.919.85 0.1000 / +800.633.9876
+1.919.85 0.1001 FAX
SF 26X
Two-Way SoundField Open Back 8 Ohm Ceiling Speakers
The Extron SoundField
®
SF 26X is a two-way ceiling
speaker featuring an open back and coaxial dual driver
design for use in non-plenum airspace environments.
The driver complement includes a 6.5" (16.5cm)
woofer coupled to a 3/4" (1.9cm) ferrofluid-cooled
dome tweeter. The SF26Xprovides a frequencyrange
of 50Hz to 20kHz for accurate voice and detailed
music reproduction. This speaker offers a nominal
impedance of 8ohms, and is engineered with a wide,
uniform 110° conical coverage and uncoloredoff-axis
response. The SF26X features a thin-edged bezel for a
refined appearance on the ceiling, and a magnetically
attached grille.
FEATURES
• Open back, infinite baffle design
• 8ohm nominal impedance
• 3/4" (1.9cm) ferrofluid-cooled dome tweeter
• 6.5" (16.5cm) polypropylene woofer
• Frequency range: 50Hz to 20kHz
• 25watts continuous pink noise, 50watts
continuous program
• 110° conical dispersion
• Internal driver overload protection
• Thin bezel and magnetically attached grille
• 5year parts and labor warranty
Model Version Description Part Number
SF 26X 8 ohm - Open Back, Pair ............................ 60-1312-03
AUDIO PRODUCTS
Model Version Description Part Number
CS 123T Full-Range SpeedMount Speaker System, Pair ....... 42-242-03
CS 120P SpeedMount Enclosure, Pair ......................... 70-976-01
CS 3T Full-Range, Open Back Speaker, Transformer, Pair ... 60-1463-03
CS 123T
Full-Range SpeedMount Ceiling Speaker System
The Extron CS123T SpeedMount
®
Ceiling Speaker
System is a patented low profile, plenum rated
two-piece speaker system. It provides an extremely
wide 165° conical dispersion for flexibility in speaker
spacing. The system is designed for applications
where high intelligibility and maximum coverage
is desired in paging applications and low ceiling
installations. The innovative system consists of the
CS120P plenum rated enclosure and a CS3T full-
range speaker cartridge. The enclosure installs quickly
into 2'x2' (61cm x 61cm) or 600mm x 600mm
suspended ceilings. The speaker cartridge features
a 3" (7.6cm)full-range driver, and can be used in
70/100volt or 8ohm operation. The CS123T is
available as a complete assembly, or the CS120P and
CS3T can be purchased separately to accommodate
division-of-labor installations. This unique speaker
design greatly simplifies ceiling speaker installation and
delivers significant time and cost savings.
FEATURES
• Patented two-piece speaker system for suspended
ceilings in division-of-labor installations
• Enclosure and speaker cartridge can be installed
separately by low-voltage and AV system
contractors
• Provides significant time and cost savings in ceiling
speaker installation
• 3" (7.6cm) full-range driver
• 165° conical dispersion provides wide coverage and
allows for flexible speaker placement
• 8ohm direct or 70/100volt operation on a
6 position, behind-the-grille selector
• 16watts continuous pink noise, 32watts
continuous program
• Internal driver overload protection
• Thin bezel and magnetically attached grille
• Grille and bezel are available in white only and may
be painted to match environment
• Spring-loaded locking arms on the CS3T for
quick installation
• Fast-installing enclosure speeds installation; no tile
bridge necessary
• UL2043 plenum rated enclosure
• Low profile, 5" (12.7cm) deep enclosure for
plenum environments
• Compatible with US 2'x2' ceiling grids and metric
600mm x 600mm ceiling grids
• Reinforced enclosure minimizes acoustical
vibrations
• 5 year parts and labor warranty