Operating Manual

16
The following table shows the available configurations.
Tag Configurations
TMBD FW Version XXX
Configuration
ID
Badge
Type
Beacon Rate
Motion
enabled
Transmission
166
iTAG X30
5 Seconds
No
Uni Directional
167
iTAG X30
15 Seconds
No
Uni Directional
168
iTAG X30
1 Minute / 15 seconds motion
Yes
Uni Directional
169
iTAG X30
3 Minute / 5 seconds motion
Yes
Uni Directional
170
iTAG X30
3 Minute / 15 seconds motion
Yes
Uni Directional
171
iTAG X30
3 Minute / 30 seconds motion
Yes
Uni Directional
172
iTAG X30
5 Minute / 30 seconds motion
Yes
Uni Directional
4.2.5 Setting the Configuration
The tag configuration is set using Hardware Manager and Tag Manager BD.
4.2.6 Updating the Firmware
The iTAG X30 does not automatically check for Firmware and configuration updates.
If a new version of tag firmware is available, you will be notified.
4.3 LED and Audio Indications
The iTAG X30 has multi-colour LED’s on the top of the tag and on the front of the tag,
Update images with drawings from quick start guide
Green Flashing – Tag is active
Red Static Top and Front -
Call button activated
Orange Flashing - Tag error
Red Static – Call button
activated