Operating Manual

18
• Changes in transmission interval
• Temperature
• Motion
• Indoor/Outdoor applications
• Time to receive firm GPS co-ordinates
4.5.3 Battery Capacity
The tag’s battery capacity degrades over a period, depending on the number of
charge cycles.
4.5.4 Charging the Battery
The iTAG X30 is charged using the USB Charging Cable provided. It its attached
and detached from the rear of the tag as shown:
The charger input conditions listed in the Special Conditions of Safe Use must be
observed.
Charging is only permitted between 0
o
C and 45
o
C. When connecting to a USB
power supply, ensure the supply is rated less than 100W.
4.6 Transport
All iTAG X30 devices must be transported and stored such that they are not subjected
to any excessive mechanical or temperature stresses.