Operating Manual

19
4.7 Authorized Persons
Only persons trained for the purpose are authorized to handle the iTAG X30; they must
be familiar with the unit and must be aware of the regulation and provisions required
for explosion protection as well as the relevant accident prevention regulations.
4.8 Cleaning and Maintenance
The iTAG X30 and all its components require no maintenance and are self-monitoring.
All work on the iTAG X30 must be carried be performed by Extronics approved
personnel.
4.8.1 Assembly and Disassembly
The iTAG X30 is provided ready assembled and should not be dismantled by the
user.
4.8.2 Cleaning and Maintenance Intervals
The cleaning interval depends on the environment where the system is installed.
4.8.3 Aggressive substances
Some cleaning materials include aggressive ingredients that can harm tags. We
recommend that you do not use compounds containing:
• Combinations of isopropyl alcohol and dimethyl benzyl ammonium chloride
• Combinations of ethylene Diamine Tetra Acetic Acid and Sodium Hydroxide
• Benzul-C12-16-Alkyl Dimethyl Ammonium Chlorides
• D-Limonene
4.9 Exposure to external stresses
The iTAG X30 is not designed to be subjected to excessive stresses e.g. vibration,
heat, impact.